Ingenico iWL25 Series Operating Manual Download Page 116

Page: 116 / 132

SKYZER TECHNOLOGIES

PAGE 116 OF 132

INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE

Version 1.00

12.13.4

Settlement Inquiry

This function is used by the merchant to retrieve either the current subtotals or

historical settlement information from Paymark.
NOTE: Settlement inquiry data can be retrieved retrospectively to a maximum

of 14 days.

Step Terminal Display

Description

1.0

PAYMARK EFTPOS
1.EFTPOS MENU
2.HOSPITALITY MENU
3.ADMIN MENU
4.SUPERVISOR MENU

Press MENU key and then scroll through using down arrow key until ADMIN MENU

is shown on the display.

Press the corresponding number key or ENTER to access ADMIN menu.

2.0

ADMIN MENU
1.TOTAL
2.INQUIRY
3.CUTOVER

Press the corresponding number key or down arrow key to select INQ to perform a

settlement inquiry.

3.0

1 Merchant 1
2 Merchant 2
3 Merchant 3

Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by

ENTER.

4.0

SELECT OPTION

XX/XX OTHER

- Press F1 to initiate a settlement inquiry for the current settlement period (date will

be shown). Proceed with step 4.0.
- Press F4 to enter a date for a different settlement period. Proceed with step 4.1

4.1

DATE – DDMMYYYY

XX/XX/XXXX

Enter date for which you would like to make a settlement inquiry, ensuring that date

is entered in DDMMYYYY format. Press ENTER when correct date has been entered,

CLEAR if you wish to re-enter date, CANCEL if you wish to cancel settlement

inquiry.

5.0

PROCESSING NOW

PROCESSING NOW will be displayed on the terminal while processing to retrieve

the transaction.
NOTE: Terminal will prompt for any stored Tip Transactions and/or Electronic Offline

Voucher to be transmitted. Press ENTER to transmit or CLEAR to proceed with

settlement cutover.

6.0

TRANS. COMPLETE

Settlement inquiry record is printed.

NOTE: Any expired stored Hospitality, EOV offline and/or Contactless

transactions, will be prompted to upload when Settlement Inquiry is performed.

To upload these stored transactions at that time, press ENTER or CLEAR to

cancel upload and proceed with Settlement Inquiry.

Summary of Contents for iWL25 Series





































































































































Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands

Ingenico iWL25 Series, Operating Manual

Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands