RJ150-30 / Operations and Maintenance Manual
Mobile Aircraft Air Conditioner
Trailer Mounted, Cool Mode Only
______________________________________________________________________________
JANUARY 20, 2004
SECTION 2 - 3
PAGE 9
(7) For blower assembly installation, reverse the removal process. Once
installed, test unit to ensure blower phase connects and blower direction
are correct. Refer to Section 1-2, Operating Procedures
C. Condenser Fan:
The condenser fan is mounted on a pedestal, interior to the condenser coil
assembly. (See Figure 1) Remove top canopy panel above the condenser fan
for access.
(1) Electrically disconnect the condenser fan. Tag all connections. Refer to
Section 2-2, Electrical Schematics.
(2) Remove condenser fan from pedestal by removing retaining bolts (4).
(See Figure 6)
Figure 6. Condenser Fan
(3) Lift condenser fan assembly up through canopy frame and away from
unit.
(4) To install the condenser fan, reverse the removal process.
(5) When installation is complete, test the unit to ensure proper operation.
Refer to Section 1-2, Operating Procedures.
Condenser
Fan Motor
Mounting Bolts (4)
(Both Sides)
Condenser Fan
Pedestal
