47
DE
Abb. 12
Abb. 13
Widerstand
Ofenventilator
l
l
die Schrauben innerhalb der Kammer
ausschrauben, die den Widerstand blockieren,
nachdem den Seitenunterstand-Ventilator und die
Träger vorbeugend weggenommen zu haben.
Nachdem man die hintere Seite entfernt hat, kann
man die entsprechenden elektrischen Anschlüße
erreichen.
nachdem man die hintere Seite innerhalb des
Ofens entfernt hat, die Schutzabdeckung des
Lüfters abnehemen. Die linke Nutmutter
ausschrauben, die den Lüfter befreit, ihn
herausnehmen und die drei Schrauben vom
Motorflansch ausschrauben.
Danach soll man die Tür nach außen heben, wie in
Bild gezeigt. Um diese Operationen durchzuführen,
die Tür auf den Seiten in der Nähe der Scharnieren
fassen.
Um die Tür wieder zu montieren, die Scharniere in
ihre Führungen einsetzen. Bevorman die Tür wieder
schließt soll man nicht vergessen, die zwei
beweglichen Bügel
“ ”
zu entfernen, die dazu
gedient haben, die 2 Scharniere einzuhaken.
Für die Reinigung der Teile aus Kristallglas soll man
nur lauwarmes Wasser und keine rauhe Tücher oder
Schleifmittel verwenden.
.
Es wird keine besondere Wartung gebraucht. Man
soll nur ab und zu den Zustand der Leitungen, der
Steuerungen und der elektrischen Widerstände
überprüfen. Für andere Teile, die ersetzt werden
können, folgende Anweisungen beachten:
die Schutzkappe
“ ”
ausschrauben, die im
Innenteil des Ofens herausragt und die Lampe
abdeckt. Nachdem man die Lampe ersetzt hat, die
Abdeckung
“ ”
wieder montieren.
B
Reinigung der Teile aus Kristallglas
Die Kristallgläser nicht
reinigen, wenn sie noch warm sind
Ersetzung
Ofenlampe
A
A
l
Der Hersteller kann nicht für
eventuellen Schaden an Personen oder
Gegenständen verantwortlich gehalten
werden, wenn die in diesem Handbuch
enthaltenen Anweisungen oder, falls
ungenugend, die Vorschriften oder die
Sicherheit von elektrischen Anlagen
nicht eingehalten werden.
HINWEIS!
Die Installation, die elektrische
Umrüstung und die außergewöhnliche
Wartung des Gerätes dürfen
ausschließlich von hierzu befugten
Installateuren oder von Technikern des
Elektrizitätswerks unter
Berücksichtigung der geltenden
Sicherheitsvorschriften vorgenommen
werden.
Steuerungsvorrichtungen
Dichtung
Sicherheitseinrichtungen
l
l
man erreicht sie, nachdem man das Gehäuse und
die Stirnwand entfernt hat.
die Dichtung aus ihrem Sitz herausnehmen und
mit einer neuen ersetzen.
Das Gerät ist mit einenSicherheitsthermostat
ausgestattet, im Falle einer Überhitzung des
Garraumes schaltet es sich ein und schaltet den
Ofen aus.
Das Gerät ist mit die Gitter zum Schutz gegen eine
versehentliche Berührung von Sich in Bewegun
befindlichen Komponenten der Garkammer
ausgestattet.
Summary of Contents for GIERRE BRIO INOX
Page 64: ...Cod LIB100 904 01001 19 ...