ifm Vision Assistant O3M
90
11.2.3 Adding a graphic.
The following buttons add a graphic to the "Preview of the 2D overlay" .
The [Add] button opens the file selection which is used to add
further graphics to the selection shown below .
The selection shows all graphics stored on the device .
The graphics "Icons #2", "Icons #3" and "Icons #4" are already
stored on the device when delivered . Each added graphic is shown
below the icon . Each graphic includes its own ID (e .g .: "#65532") .
The following graphic formats are supported:
png, jpg, bmp, ico and gif .
Graphics with transparency are only possible in png format .
With the symbol
, the graphic is deleted from the selection and
from the device .
After clicking on the graphic in the selection, the mouse pointer
turns into a cross hair . Then, the graphic in the 2D overlay is shown
in the "Preview of the 2D overlay" .
The graphics can be edited in the "Preview of the 2D overlay":
●
move the graphic by holding the mouse button,
●
scale the graphic by clicking on the corner dots .
The graphic is always scaled at a fixed aspect ratio . The
graphic can only be scaled up to its original size .
By clicking on
, the graphic can be edited and the following window opens .
The graphic has the ID 6 . Each graphic has an own ID .
The graphics are directly saved on the device . Thereby, the
graphics can be controlled via CAN . To control them, the IDs
are required .
In the list "visible", the visibility of the graphic can be set .
The visibility of the graphic can be
coupled to the different conditions
of the device .