manualshive.com logo in svg

IFM O3M150, Software Manual

Share
Download
IFM O3M150 Software Manual Download Page 109

109

ifm Vision Assistant O3M

UK

12.3  Several ROIs

With "Several ROIs", a three-dimensional grid of ROIs is generated .

The button [Create ROI grid] opens the following window with which 

a grid of several ROIs can be created .

The window is divided into six areas:

1 .  With "min/max values", the position of the grid in the world 

coordinate system is indicated . The "X/Y/Z separation" 

indicates the division of the grid and hence the number of 

ROIs (→ „12.3.1 Min/max values and separation“).

2 .  With "Result type", the result type for the pixels of the ROI 

group can be set (→ „12.3.2 Result type“).

3 .  With "Output values" the properties of the result type can 

be set . The term "Output value" changes according to the 

set result type (→ „12.3.3 Output value“).

4 .  With "Reference value for min/max", the output value is 

limited by only providing certain values in relation to the 

reference value (→ „12.3.4 Reference value for min/max“).

5 .  With "Existing ROIs" you can set what is supposed to 

happen with ROIs which exist before the ROI grid is set 

(→ „12.3.5 Existing ROIs“).

6 .  With "Select group option" the division of ROIs into groups 

can be set (→ „12.3.6 Select group option“).

Summary of Contents for O3M150





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands