53
ifm Vision Assistant O3M
UK
7.1.7 Online parameter setting
With the [Online parameterisation] switch, the online parameter setting of the device is activated .
When "online parameterisation" is activated, changed parameters will be immediately written to the
device . The changes are visible within a very short time (real-time) .
The changes are written in a volatile partition of the RAM and are lost e .g . when the device is
rebooted .
►
Save the changes permanently by clicking on [Save] .
If "online parameterisation" is deactivated, changed parameters are only written after clicking on
[Save] . The changes are stored in a non volatile partition of the RAM and will be visible after approx . 15
seconds .
"Online parameterisation" is deactivated by default .
"Online parameterisation" can be used by controllers (CAN controllers) . Adequate libraries are
available for ifm mobile controllers with CAN input
(→ „16.3 Connect O3M to external devices“).