ifm Vision Assistant O3M
142
15.3 Description of the "Input" modules
In the "Input" selection area, available modules for entering signals are displayed .
The available modules depend on the installed firmware . Depending on the firmware variant (DI,
OD or LG) different input modules are available .
The following input modules are available in each firmware version:
●
Digital CAN input signals
●
Analogue CAN input signals
●
Extrinsic calibration
●
Diagnostics
15.3.1 "Digital CAN input signals" module
The "Digital CAN input signals" module can receive up to 14 binary input values (1 bit) dynamically across
the CAN interface .
The CAN interface is described in a separate CAN document .
The "Digital CAN input signals" module has the following setting:
Setting
Data type
Description
Index
Binary
Vector with 14 values, address range from 0-13
15.3.2 "Analogue CAN input signals" module
The "Analogue CAN input signals" module can receive up to 6 binary input values (12 bit) dynamically
across the CAN interface .
The CAN interface is described in a separate CAN document .
The "Analogue CAN input signals" module has the following setting:
Setting
Data type
Description
Index
Numerical
Vector with 6 values, address range from 0-5
