ifm Vision Assistant O3M
108
Only one class can be active at a time . There are two different classes of ROIs:
●
3D definition (preset)
●
Pixel definition
●
off
The "3D definition" works with 3D data . The applied ROIs are defined in the world coordinate system . For
the 3D definition, devices with 3D capabilities, such as the O3M151, are required .
The "pixel definition" works with 2D data . The applied ROIs are defined two-dimensionally on the basis of
the pixels .
"Off" completely deactivates the ROIs . The following settings are not available .
The separate programming manual "basic functions" contains further information about which ROI
mode is appropriate for which application .
12.2 Global settings
With the "Global settings", the output of the ROI groups can be set . "Output" signifies the measuring
result per ROI group .
The following trigger sources can be set:
●
xyz+ampl: the three coordinate axes and the amplitude
●
x only: the x coordinate axis
●
y only: the y coordinate axis
●
z only: the z coordinate axis
●
xyz only: the three coordinate axes
●
ampl only: the amplitude
The set output applies to all defined ROI groups . ROIs that are already set are deleted when the
global settings are changed .
