93
ifm Vision Assistant O3M
UK
11.4 Variant options of the DI firmware
The variant options contain options to display 3D objects in the 2D overlay .
The available options depend on the installed firmware (→ „7.1.3 Firmware update“). The following
options require the DI firmware basic functions .
With the variant options of the DI firmware, Regions of Interest (ROI)
are shown and configured in the 2D overlay .
The switch "Visualise ROIs" activates the visualisation of ROIs in the
2D overlay .
In the list "ROI visualization design", the way the ROIs are visualised
can be set . The following types of visualisation are available:
●
[3D moving wall]
(→ „11.4.1 Visualising 3D ROIs as a moving wall“)
●
[3D projection floor projection]
(→ „Colour mode [Colour map]“)
●
[2D ROI]
(→ „11.4.3 Visualisation of 2D ROIs“)
11.4.1 Visualising 3D ROIs as a moving wall
The ROI visualisation type "3D moving wall" shows the provision of the
ROI groups in the x, y and z axis (length, width and hight) as a coloured
overlay . The coloured overlay is visualised as a wall .
"Output" refers to the measuring result of the ROI group
(→ „12.2 Global settings“).
The ROI visualisation type "3D moving wall" is only suitable for
three-dimensionally defined ROIs (→ „12.1 ROI mode“).
In the figure on the left, the output of 4 ROI groups is visualised as a
coloured overlay and the X values as a text .
[Colour map] is set as "colour mode" .
The "3D ROI frame" is set to [black] .
The output of the ROI group can additionally be shown as text . In "text
visualisation ROI results", the control fields can be activated:
●
X value
●
Y value
●
Z value
The text fields can overlap if several ROI groups are provided at
the same time .
