ifm Vision Assistant O3M
94
In the list "colour mode", the behaviour of the colours of the colour
overlay can be set . The following colour modes are available:
●
[Colour map]
The colour changes with the set reference value .
●
[Colour switch]
After a threshold value is reached, there is a change between 2
colours .
●
[Logic output]
The colour changes according to the condition of the virtual digital
outputs of the ROI groups .
●
[Defined colour]
The colour setting is fixed and does not change .
Colour mode [Colour map]
In the colour mode [Colour map], the colour changes with the set
reference value .
The "reference value" defines with which ROI group output the moving
wall shifts . The following reference values can be selected:
●
[X] - The moving wall is projected in the Y-Z level and moves with
the reference value X .
●
[Y] - The moving wall is projected in the X-Z level and moves with
the reference value Y .
●
[Z] - The moving wall is projected in the Y-X level and moves with
the reference value Z .
The reference value additionally defines which ROI group output is
used as basis for the colouring of the moving wall .
The "Map type" defines the type of the colour gradient . You can
choose among the following:
●
Colour map 1
●
Colour map 1 mirrored
●
Colour map 2
●
Colour map 2 mirrored
A start and end value can be set:
●
Output of the ROI group < start value: The colour of the start value
is used .
●
Output of the ROI group > end value: The colour of the end values
is applied .
The "preview" graphically shows the set colour map in combination
with the start and end value .
The "3D ROI frame" is configurable:
●
By activating the control field, the "3D ROI frame" is shown .
●
By clicking on the colour field, the colour of the "3D ROI frame" can
be changed .
