117
ifm Vision Assistant O3M
UK
12.3.5 Existing ROIs
With "Existing ROI" you can set what is supposed to happen with ROIs which exist before the ROI grid is
set .
The following behaviour can be set:
●
"Replace": Already existing ROIs are deleted .
●
"Keep": Already existing ROIs are kept .
12.3.6 Select group option
With "Select group options", the division of ROIs into groups can be set .
The following behaviour can be set:
●
"Individual group": A separate ROI is created for each group .
●
"Entire group": All ROIs are bundled in one group .
12.4 ROI groups
With "ROI groups", ROIs can be bundled in groups .
For each ROI group, the following settings can be defined:
●
With "Result type", the result type for the pixels of the ROI group
can be set (→ „12.3.2 Result type“).
●
With "Output values" the properties of the result type can be set .
The term "Output value" changes according to the set result type
●
With "Reference value for min/max", the output value is limited
by only providing certain values in relation to the reference value
(→ „12.3.4 Reference value for min/max“).
Several ROI groups can be created .
The [Add] button creates a new ROI group . The existing ROI groups
are displayed below each other .
With the left mouse button you can select an ROI group . The
selected ROI group is highlighted light grey .
The [Recycle bin] button deletes the ROI group .
