46
ifm
Programming Manual
ecomatmobile
CabinetController (CR0301) Runtime System V05
2016-04-21
Configurations
Set up the programming system
>
Activate the PLC configuration (e.g. CR0033)
15824
During the configuration of the programming system (
→ previous section) the PLC configuration was
also carried out automatically.
► The menu item [PLC Configuration] is reached via the tab [Resources].
Double-click on [PLC Configuration] to open the corresponding window.
► Click on the tab [Resources] in CODESYS:
► In the left column double-click on [PLC Configuration].
>
Display of the current PLC configuration (example
→ following figure):
Based on the configuration the user can find the following in the program environment:
•
all important system and error flags
Depending on the application and the application program, these flags must be processed and
evaluated. Access is made via their symbolic names.
•
The structure of the inputs and outputs
These can directly be designated symbolically (highly recommended!) in the window [PLC
Configuration] (
→ figure below) and are available in the whole project as [Global Variables].
Summary of Contents for Ecomat 100 Mobile CR0301
Page 212: ......