43
ifm
Programming Manual
ecomatmobile
CabinetController (CR0301) Runtime System V05
2016-04-21
Configurations
Set up the runtime system
>
4.1.1
Reinstall the runtime system
14092
2733
On delivery of the
ecomatmobile
device no runtime system is normally loaded (LED flashes green at
5 Hz). Only the bootloader is active in this operating mode. It provides the minimum functions for
loading the runtime system (e.g. RS232, CAN).
Normally it is necessary to download the runtime system only once. The application program can then
be loaded to the device (also several times) without influencing the runtime system.
The runtime system is provided with this documentation on a separate data carrier. In addition, the
current version can be downloaded from the website of
ifm electronic gmbh
at:
> Select your country > [Service] > [Download]
2689
NOTE
The software versions suitable for the selected target must always be used:
• runtime system (
ifm_CR0301_Vxxyyzz.H86
),
• PLC configuration (
ifm_CR0301_Vxx.CFG
),
• device library (
ifm_CR0301_Vxxyyzz.LIB
) and
• the further files.
V
xx: 00...99
yy: 00...99
zz: 00...99
version
target version number
release number
patch number
The basic file name (e.g. "
CR0301
") and the software version number "xx" (e.g. "
02
") must always
have the same value! Otherwise the device goes to the STOP mode.
The values for "yy" (release number) and "zz" (patch number) do
not
have to match.
4368
The following files must also be loaded:
• the internal libraries (created in IEC 1131) required for the project,
• the configuration files (
*.CFG
) and
• the target files (
*.TRG
).
It may happen that the target system cannot or only partly be programmed with your currently
installed version of CODESYS. In such a case, please contact the technical support department of
ifm
electronic gmbh
.
The runtime system is transferred to the device using the separate program "
ifm
downloader". (The
downloader is on the
ecomatmobile
DVD "Software, tools and documentation" or can be downloaded
from
ifm's
website, if necessary):
> Select your country > [Service] > [Download].
Normally the application program is loaded to the device via the programming system. But it can also
be loaded using the
ifm
downloader if it was first read from the device
(
→ upload).
Summary of Contents for Ecomat 100 Mobile CR0301
Page 212: ......
