iDect FC6A series, User Manual

Page: 388 / 474

11: SD M
EMORY
C
ARD
11-20 FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722
Downloads and Uploads using the SD Memory Card
Using the SD memory card, user programs, program comments, and system software can be downloaded to the CPU module. The
user program and other data that has been written to the CPU module can also be uploaded to the SD memory card.
ZLD Files
Downloads and uploads with the SD memory card use ZLD files that contain the user program, program comments, and system
software data in a single file.
ZLD files are created with WindLDR or by uploading to the SD memory card. Data can be reused and edited by opening the ZLD
file in WindLDR.
When creating a ZLD file with WindLDR, the data other than the user program can be optionally set. The version of the CPU
module system software can also be specified and set.
When downloading from the SD memory card, the data in the ZLD file cannot be partially selected and downloaded. To change the
data that will be download according to the application, create it as a separate ZLD file.
The data that is written to the ZLD file is as follows.
*1 If the applicable data is not set in the ZLD file, the corresponding data will not be downloaded.
The created ZLD file is saved to the
\
FCDATA01
\
PROGRAM folder on the SD memory card. ZLD files can be saved to folders other
than the
\
FCDATA01
\
PROGRAM folder, but these will not be downloaded from the SD memory card. Only alpha-numeric characters
can be used for the file name.
autoexec.ini File
Using the autoexec.ini file, the file name and action can be changed when downloading or uploading a ZLD file when the FC6A
Series MicroSmart power is turned on and by special internal relay operations.
The autoexec.ini file is created by using WindLDR or a text editor.
Only the autoexec.ini file saved to
\
FCDATA01 on the SD memory card is valid.
For the autoexec.ini file format, see "Autoexec File Format" on page 11-27.
ZLD File Data When Creating ZLD Files in WindLDR
When the CPU Module Creates ZLD Files by
Uploading Data to the SD Memory Card
User program Set from a created user program. The user program running on the CPU module is written.
Program comments
Set the user program comments.
(Optional)
*1
The program comments running on the CPU module are
written.
CPU module system
software Specify and set the CPU module system software
version. (Optional)
*1
The system software running on the CPU module is
written.