iDect FC6A series, User Manual

Page: 383 / 474

FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722 11-15
11: SD M
EMORY
C
ARD
Recipe Function Parameters
This section describes the dialog box parameter settings required to use the recipe function.
Recipe Editor
Use Recipe Editor to collectively manage the save destination for recipe data, the devices for writing recipe values and reading
device values, and those execution conditions.
(1) Recipe Editor tab
Displayed as "Block Number Block Name".
Multiple tabs can be opened and switched between to edit settings.
(2) Block Number
Displays the block number of the block being edited.
The block number of the block being edited can be changed by selecting and changing the number in the list. A confirmation
message is displayed when the number is changed. Click
OK . Already registered block numbers are not displayed in the list.
(3) Block Name
Enter the block name. The name entered here is displayed under Recipe on the Project Window.
(4) Access to
Select the save destination for recipe data that is used when the block is executed as External Memory or Internal
Memory .
(5) Action Setting
Select the action that uses the recipe data as the following.
(6) Read Trigger (PLC to Recipe)
Sets the device that triggers batch reading device values and saving them to the SD memory card as a recipe file. This
parameter can only be configured when
Read/Write or Read is selected under Action .
Read/Write : Saves batch read device values to the SD memory card as a recipe file and writes recipe values to devices. This
option can only be configured when External Memory is selected under Access to .
Read : Saves batch read device values to the SD memory card as a recipe file. This option can only be configured when
External Memory is selected under Access to .
Write : Writes recipe values to devices.
(1)
(2) (6)
(7)
(3)
(4)
(5)
(8)
(9) (11) (10)