iDect FC6A series, User Manual

Page: 392 / 474

11: SD M
EMORY
C
ARD
11-24 FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722
Auto Upload to SD Memory Card
When there is no ZLD file to download on an SD memory card with an autoexec.ini file that executes a download, an upload can
be executed instead of a download.
By using the auto upload function, the data uploaded from the CPU module can be copied to other CPU modules without having to
edit the SD memory card or autoexec.ini file during the process.
To perform an auto upload, it must be enabled in the autoexec.ini file that executes a download. For details, see the autoexec.ini
file parameters.
Example 1: When there is no ZLD file on the SD memory card
All data will be uploaded and a ZLD file will be created.
Upload CPU Module Data
Data Stored in the ZLD File on
the SD Memory Card
ZLD File Data on the SD
Memory Card after Upload
CPU Module
System Software
Ver1.30
None
(No ZLD file on the SD memory
card)
Ver1.23
User program Project1 Project1
Program comments Comment1 Comment1
Example 2: When the system software versions are different
The ZLD file will be overwritten with a new ZLD file.
Upload CPU Module Data
Data Stored in the ZLD File on
the SD Memory Card
ZLD File Data on the SD
Memory Card after Upload
CPU Module
System Software
Ver1.30 Ver1.23 Ver1.30
User program Project1 Project1 Project1
Program comments Comment1 Comment1 Comment1
Example 3: When the user program and program comments are different
The ZLD file will be overwritten with a new ZLD file.
Upload CPU Module Data
Data Stored in the ZLD File on
the SD Memory Card
ZLD File Data on the SD
Memory Card after Upload
CPU Module
System Software
Ver1.30 Ver1.30 Ver1.30
User program Project2 Project1 Project2
Program comments Comment2 Comment1 Comment2
Operation Action When the CPU Module is Read Protected
The CPU module power is turned on when an
SD memory card with an autoexec.ini file
that executes an auto upload has been
inserted in the SD memory card slot.
The data is uploaded from the CPU module
with the ZLD file name specified by the
autoexec.ini file.
A ZLD file is saved to the
FCDATA01 PROGRAM folder.
\ \ \
The upload is not performed.
While the CPU module is running, special
internal relay M8251 is turned on when an
SD memory card with an autoexec.ini file
that executes an auto upload has been
inserted in the SD memory card slot.
While the CPU module is running, an SD
memory card with an autoexec.ini file that
executes an auto upload is inserted in the SD
memory card slot.