Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
Page
65
of 84
NOTICE
Saving any changes to the network settings will cause the ICM to
re-start, causing momentary loss of communications.
Network
MAC Address:
Shows the MAC address assigned to the unit. It is also
shown on the LCD Network Status screen.
Enable DHCP:
Select the check box if the network uses a DHCP server
to automatically assign IP addresses. The default is Enabled.
To manually assign a static IP address to the unit uncheck this box, then
set the following parameters.
IP Address:
Set a unique IP address for the unit.
Subnet Mask:
Set the mask for the subnet the unit is located on.
Gateway:
Set the IP address of the default router (Gateway) used for
connecting attached devices to different networks.
Primary DNS:
Set the IP address of the Primary DNS Server for the
network.
Secondary DNS:
Set the IP address of the Secondary DNS Server for
the network.