Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
Page
6
of 84
Description
Model No.
25 A circuit breaker for LDM
ICT-CB25
30 A circuit breaker for LDM
ICT-CB30
Blanking plate for unused power module positions (snap-in)
ICT-BPM
Battery temperature sensor (1pc included with Power System/BMM)
ICT-TMP
Secondary power shelf output bus bar jumper strap (for parallelling two
power shelves) (included)
ICT-PAR
Secondary power shelf parallel RJ11 control cable jumper (4”) (included)
ICT-JMP
2.5
Rack Mounting
CAUTION
Provide adequate support for the rear of the unit without
obstructing the air vents.
Mount the unit in an enclosed, standard 19-inch equipment rack or other
restricted access location, using rack mounting screws (not supplied).
Support the rear of the unit with rack chassis supports or back rail if required.
2.6
Ground Connection
Figure 2. Typical Rear View
WARNING
De-energize the system before making any change to the wiring
and connections.
BMMD
Output
DC-DC Converter
Module Output
Main Chassis
DC Output
AC Input
Alarm Output
Remote
Inputs
Network
Connection
Chassis Ground Stud
LDM Output