Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
Page
18
of 84
3.0
OPERATION: FRONT DISPLAY PANEL
Switch on the external AC power source circuit breaker; check that the
green POWER LED is lit on each Power Module; and that the Intelligent
Control Module (ICM) front graphic display is lit.
The Hybrid Ultra will start up and operate at the factory default settings when
AC power is connected, generally requiring no other set up or adjustment
for basic operation.
3.1
Graphic Display
Use the front display panel and four interface buttons on the ICM to monitor
the supply operation and to make changes to settings such as output
voltage, current limit, and battery low voltage disconnect points.
Figure 12. ICM Front Control Interface
NOTE: The display will turn off after approximately 60 minutes of no use and
can be reactivated by momentarily pressing any button.
Up/Down Buttons:
Use to scroll through display screens, and to
adjust selected settings.
Enter Button:
Use to select a screen for adjustment; to save a change
and return to the previous screen.
Back Button:
Use to return to previous screen without saving changes.