Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
Page
63
of 84
Serial Number:
Shows the serial number.
Date and Time Settings
Current System Time:
Shows the current system date and time.
Synchronize with NTP Server:
Select the check box to synchronize
with NTP Server. The default is Enabled.
NTP Server:
Set an NTP server address here (i.e., time.nist.gov) to
automatically load network time.
Time Zone:
Set the time zone this unit will be using.
Set Time Manually:
Select the check box to enable manually setting the
time and date. The default is Disabled.
Network Watchdog
Watchdog Enabled:
Select the check box to enable the Network
Watchdog. The watchdog will cycle power output on loss of
communications. Use this to reset network routers or other devices that
may require rebooting to re-establish communications with the unit. The
default is Disabled.
Primary IP Address:
Set a primary IP address for the unit to ping to
determine whether the network is functioning.