ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
310
Appendix IV
：
The configuration setting of M-7000/DL module
PMC/PMD allows connection to ICP DAS M-7000/DL modules for the I/O channel
data settings and data retrieve. However, for other configuration of the M-7000/DL
modules must be completed via DCON Utility in advance, so that the PMC/PMD can
accurately connect to M-7000/DL module. The procedures for M-7000/DL module
parameter settings are as follow:
1.
Connect the M-7000/DL modules to the PC (with DCON Utility installed) via
RS-485 cable, make sure the RS-485 cable is properly connected. For PC to
receive RS-485 signals, a RS-232 to RS-485 or a USB to RS-485 converter is
required. For more converter information, please refer to ICP DAS converter
product page:
http://www.icpdas.com/root/product/solutions/industrial_communication/converte
2.
If the ICP DAS I/O module is M-7000 series, please follow the steps as
below for the configuration setting.
A.
You can download DCON Utility from the link below, and Install the
DCON Utility on PC
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
