ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
202
value match the evaluation criteria, the result of this condition
evaluation will be “true”.
iv
PMC/PMD provides 7 value options; you can compare them
with the Input Register value for condition evaluation. Please
refer to “
” section for more detailed information for
comparison value settings of these 7 options.
v
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.1.2.4
Holding Register
Holding Register channel value from Modbus TCP/RTU Slave
module can be included in the IF condition statements; the editing
page for Holding Register Condition Setting is shown as below:
Figure11-9 :
Holding Register condition setting page
Follow the steps below:
i
Specify the module and address of the Modbus TCP/RTU
Slave module from the dropdown list of the “Module &
Address” section that you are going to include its value in the
IF condition statements.
ii
Set up the expression statement for this Holding Register
address value. Select an operator from “=”,”>”,”<”,”>=” or
“<=”.
iii
And then specify the evaluation value. If this Holding Register
value match the evaluation criteria, the result of this condition
evaluation will be “true”.
iv
PMC/PMD provides 7 value options; you can compare them
with the Holding Register value for condition evaluation.
Please refer to “
” section for more detailed
information for comparison value settings of these 7 options.
v
Click “OK” button to confirm the settings and return to the
Rule settings page.
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
