ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
215
Follow the steps below:
i
Specify the module and channel from the dropdown list of the
“Module & Channel” section.
ii
Specify the output value of DO Channel from the dropdown
list of the “Status” field. The output value can be “OFF”, “ON”
or “Pulse Output” (
Pulse Output applies to XV-Board only
).
For M-7088 belongs to PWM (
Pulse width modulation
)
modules, the DO channel Action will be “Start PWM” or “Stop
PWM”.
iii
Specify the “Frequency” to be “One-Time” or “Repeat”.
iv
Specify the value in the “Waiting Time” field, it means after
the action be executed, how long the system will delay to
execute the next Action. The unit will be second(s).
v
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.2.1.3
AO
You can execute an action in AO channel of XV-Board/M-7000
module in THEN/ELSE Action statement; the editing page for AO
Action is shown as follow:
Figure11-27 :
AO action setting page
Follow the steps below:
i
From the dropdown list of the “Module & Channel” field,
select the AO channel to execute actions.
ii
Specify the Operator to be “=”, “+=”, or “-=” from the
dropdown list in the “Operator” field. The 3 operators are as
follow
：
“=”
：
Indicate assign the new AO channel value as the
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
