ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
188
(b.)
In the “Exception Date(s)” selection, click on “Add” to add the
date(s) that is/are not going to execute the schedule. Click
“Remove” to remove a pre-set Exception Date.
(c.)
In the “Time Range(s)” section, click “Add” to add new Time
Range to execute this schedule. Select the start time and the end
time from the dropdown list. Each Schedule is required to set at
least one Time Range; click on “Add” to add more Time Range.
Please note: the time zones you specified can’t be overlapped. If
you specify an end time that is earlier than the start time, such
as 20:00:00 ~ 06:00:00, it indicates the end time will be set one
day after the start date.
Click “Remove” to remove a pre-set
Time Range.
iv
Click on “OK” to confirm the setting and leave the setting page.
v
Repeat steps i~iv to complete settings of all Schedule.
vi
To modify the settings of a pre-set Schedule, please click on the radio
button in front of the Schedule, and then click on “Setting” to modify
the settings.
vii
To copy the settings of a pre-set Schedule to the new Schedule, please
click the radio button in front of the pre-set Schedule and then click
“Copy”, a new Schedule (in sequence) will be added to the list and the
settings of the old Schedule will be copied to this newly added
Schedule.
viii
To remove a pre-set Schedule, please click the radio button in front of
the pre-set Schedule and then click “Remove”.
ix
After all schedule settings are completed, click “Save” button to save
the changes.
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
