ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
52
Figure6-3 :
Time Synchronization Setting
Follow the steps below to set up Time Synchronization Setting:
i.
In the “Function Status” field, check “Enable” to enable the Time
Synchronization function.
ii.
In the “SNTP Time Server” field, input the IP address or domain name of
the SNTP Time Server. There are 3 default SNTP Time Servers, the user
could modify the address to use other server. Click “Use Default SNTP
Time Servers” to restore the default Time Server settings.
iii.
The default Port number setting is “123”, currently it is not allowed to be
modified.
iv.
In the “Sync Interval” field, select the time interval to specify how often
will the PMC/PMD automatically connect to SNTP time server for time
synchronization through the network. The user could set the time
interval to be 6, 12, or 24 hours.
v.
After all settings are completed, click “Save” button to save the changes.
In addition, users can select the time zone of the PMC/PMD location from
the dropdown list in the “Time Zone” field, and enable the daylight saving
time function in the “Daylight Saving Time” field if required.
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
