ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
64
shorten this value to improve the efficiency of the poll mechanism
between Modbus RTU Slave device and PMC/PMD.
iv.
After all settings are completed, click “Save” button to save the
changes.
Connect to HMI (or SCADA) and Modbus TCP Slave device via LAN
Figure6-20 :
I/O Function setting about LAN
The LAN function on PMC/PMD is by default set for Modbus TCP
Slave to connect HMI or SCADA. User can also select the “Modbus
TCP Master” Checkbox to enable the Modbus TCP Mater function for
connecting to Modbus TCP Slave devices through Ethernet.
6.6
Other Setting
In the “Other Setting” section, it allows to set up Contract Capacity Setting,
Demand Interval Setting and Carbon Footprint Setting. The setting interface
is shown as below:
Figure6-21 :
Other setting page
Contract Capacity Setting
In this section, it allows to enable and set Contract Capacity. To enable
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
