ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
218
Modbus TCP/RTU module in the THEN/ELSE Action statement;
the editing page for Coil Output Action is shown as follow:
Figure11-28 :
Coil Output action setting page
Follow the steps below:
i
Select the module and address of the Coil Output from the
dropdown list of the “Module & Address” section.
ii
Specify the output value of Coil Output from the dropdown list
of the “Status” field. The output value can be “OFF” or, “ON”.
iii
Specify the “Frequency” to be “One-Time” or “Repeat”.
iv
Specify the value in the “Waiting Time” field, it means after
the action be executed, how long the system will delay to
execute the next Action. The unit will be second(s).
v
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.2.2.2
Holding Register
You can execute an action to change the value of Holding Register
in the THEN/ELSE Action statement; the editing page for Holding
Register Action is shown as follow:
Figure11-29 :
Holding Register action setting page
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
