ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
217
Holding Register: using value of Holding Register from
Modbus RTU/TCP Slave modules, select the module and
address from the dropdown list to specify which channel
value will be used.
Power Meter: using the power data of the Power Meter;
select the power data from the dropdown list: V, I, kW, kvar,
kVA, PF, kWh, kvarh, kVAh, Actual Demand, Forecast
Demand, Hourly Maximum Demand, Daily Maximum
Demand, Monthly Maximum Demand, Daily Total
Electricity, Monthly Total Electricity and Yearly Total
Electricity...etc. And then select the power meter and
loop(or phase) from the dropdown list to specify which
power meter and loop(or phase) value will be used.
iv
Specify the “Frequency” to be “One-Time” or “Repeat”.
v
Specify the value in the “Waiting Time” field, it means after
the action be executed, how long the system will delay to
execute the next Action. The unit will be second(s).
vi
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.2.2
Modbus Module
Click on “Modbus Module”, 2 options will appear as the following:
Coil Output and Holding Register.
11.2.2.1
Coil Output
You can execute an action to change the status of Coil Output of
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
