ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
203
11.1.3
Power Meter
The power data of the Power Meter could be used as evaluation criteria;
the power data options are as follow: V, I, kW, kvar, kVA, PF, kWh,
kvarh, kVAh, Actual Demand, Forecast Demand, Hourly Maximum
Demand, Daily Maximum Demand, Monthly Maximum Demand,
Daily Total Electricity, Monthly Total Electricity and Yearly Total
Electricity.....etc. The setting page for Power Meter Condition Setting
is shown as below:
Figure11-10 :
Power Meter condition setting page
Select which power data of the Power Meter is going to be used and
then continue the following steps (taking option V as an example):
i
Specify the power meter and loop/phase from the dropdown list of
the “Module & Address” section that you are going to include its
value in the IF condition statements.
ii
Set up the expression statement for this power data value of the
Power Meter. Select an operator from “=”,”>”,”<”,”>=” or “<=”.
iii
And then specify the evaluation value. If this power data value of
the Power Meter match the evaluation criteria, the result of this
condition evaluation will be “true”.
iv
PMC/PMD provides 7 value options; you can compare them with
the power data value of the Power Meter for condition evaluation.
Please refer to “
” section for more detailed information
for comparison value settings of these 7 options.
v
Click “OK” button to confirm the settings and return to the Rule
settings page.
11.1.4
Microsoft Azure
Click on Microsoft Azure, 2 options will appear as the following: "
Connection Status" and " Subscribe Message".
11.1.4.1
Connection Status
The Connection Status between PMC/PMD and Microsoft Azure
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
