ICP DAS USA PMC-523 Series, User Manual

Page: 21 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
6
2 Before Installation
Modify PMC/PMD‘s network settings to fit current network environment settings,
and the default network settings of PMC/PMD is as follow:

IP
：
192.168.255.1

Subnet mask
：
255.255.0.0

Gateway address
：
192.168.0.1

DNS Server address
：
8.8.8.8 (default: Google DNS Server)
Steps
(1) Modify the network settings of the PC or Notebook to be the same network
segment as PMC/PMD. For example:

IP
：
192.168.255.10

Subnet mask
：
255.255.0.0

Gateway address
：
192.168.0.1
(2) Connect PMC/PMD LAN1 to PC by network cable. (PMC/PMD is capable
of auto-crossover)
(3) Start the browser and input http://192.168.255.1 in the address bar.
(4) Input default administrator password “ Admin
” to login into the page.
(5) After login in PMC/PMD web page, go to System Setting Network Setting,
modify the network setting to fit current network environment. More detailed
setting information please refer to 6.2 Network Setting .
(6) Save the settings and connect PMC/PMD to the network.
Please Note:
1. Before installing PMC/PMD, please finish the hardware installation of the
ICP DAS Power meter modules, and make sure all wiring connections are
accurate.
2. If there are the M-7000/DL/IR modules or Modbus TCP/RTU Slave modules
which will connect with PMC/PMD, please also finish the hardware
installation of the M-7000/DL/IR modules or Modbus TCP/RTU Slave
modules, and make sure all wiring connections are accurate.
3. One PMC/PMD allows connections to at most 24 ICP DAS Modbus power
meters (including Modbus RTU and Modbus TCP power meters.).
4. One PMC/PMD allows connections to at most 8 Modbus TCP/RTU Slave
I/O modules.
5. A single I/O interface allows connections to at most 16 devices (Power
meters and I/O modules).