ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
185
Figure10-48 :
Timer setting page(Internal Register)
vii
To copy the settings of a pre-set Timer to the new Timer, please click
the radio button in front of the pre-set Timer and then click “Copy”, a
new Timer (in sequence) will be added to the list and the settings of the
old Timer will be copied to this newly added Timer.
viii
To remove a pre-set Timer, please click the radio button in front of the
pre-set Timer and then click “Remove”.
ix
After all timer settings are completed, click “Save” button to save the
changes.
10.7
Schedule Setting
PMC/PMD provides Schedules to setup prescheduled routine tasks. The
setting of Schedule can be used to check if the system time of the PMC is in
the range of date/time setting of the schedule or not. The checking status
can be included in the IF Condition statements. Schedule setting page is
shown as below:
Figure10-49 :
Schedule setting page
The settings steps are as below:
i
Click on “Add new schedule” to add a new schedule.
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
