ICP DAS USA M-7024 User Manual Download Page 72

Page: 72 / 187

I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3

2.9 $AA2

Description:

Reads the module configuration.

Syntax:

$AA2[CHKSUM](CR)

Delimiter character

Address of the module to be read (00 to FF)

Command to read the module configuration

Response:

Valid Command:

!AATTCCFF[CHKSUM](CR)

Invalid Command:

?AA[CHKSUM](CR)

Delimiter character for a valid command

Delimiter character for an invalid command

Address of the responding module (00 to FF)

Type code of the module. For the I-7022,
M-7022, M-7024U and M-7028, this field is to
3F and 00 for M-7024U and M-7028, see
Section 1.110 for details.

Baud Rate code of the module, see Section 1.11
for details.

Data format, checksum settings and slew rate
settings of the module, see Section 1.11 for
details.

There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.

I-7021, I-7021P, I-7022, I-7024, I-7024R, M-7021A
M-7022, M-7022A, M-7024, M-7024L, M-7024R, M-7024U, M-7028

Summary of Contents for M-7024




























































































































































































Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands

ICP DAS USA M-7024, User Manual

Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands