ICP DAS USA M-7024 User Manual Download Page 59

Page: 59 / 187

I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3

2.3 #AAN

Description:

Reads the counter data of a specified digital input channel.

Syntax:

#AAN[CHKSUM](CR)

Delimiter character

Address of the module to be read (00 to FF)

The channel to be read, zero based.

Response:

Valid Command:

!AA(Data)[CHKSUM](CR)

Invalid Command:

?AA[CHKSUM](CR)

Delimiter character for a valid command

Delimiter character for an invalid command. An
invalid command is returned if the specified
channel is incorrect.

Address of the module in hexadecimal format
(00 to FF)

(Data)

Five digits data of the counter value of the
specified channel.

There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.

I-7024R
M-7024R

Summary of Contents for M-7024




























































































































































































Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands

ICP DAS USA M-7024, User Manual

Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands