ICP DAS USA M-7024 User Manual Download Page 122

Page: 122 / 187

I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3

122

There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.

Examples:

Command: ~010

Response: !0100

Reads the host watchdog status of module 01 and
returns 00, meaning that the host watchdog is
disabled and no host watchdog timeout has occurred.

Command: ~020

Response: !0204

Reads the host watchdog status of module 02 and
returns 04, meaning that a host watchdog timeout has
occurred.

Related Commands:

Section 2.34 ~**, Section 2.36 ~AA1, Section 2.37 ~AA2,
Sec 2.38 ~AA3EVV

Related Topics:

Section A.2 Dual Watchdog Operation

I-7021, I-7021P, I-7022, I-7024, I-7024R
M-7022, M-7024, M-7024L, M-7024R, M-7024U, M-7028

Summary of Contents for M-7024




























































































































































































Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands

ICP DAS USA M-7024, User Manual

Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands