ICP DAS USA M-7024 User Manual Download Page 108

Page: 108 / 187

I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3

108

2.27 $AAF

Description:

Reads the firmware version of a module.

Syntax:

$AAF[CHKSUM](CR)

Delimiter character

Address of the module to be read (00 to FF)

Command to read the firmware version

Response:

Valid command:

!AA(Data)[CHKSUM](CR)

Invalid command:

?AA[CHKSUM](CR)

Delimiter character for a valid command

Delimiter character for an invalid command

Address of the responding module (00 to FF)

(Data)

Firmware version string of the module

There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.

Examples:

Command: $01F

Response: !01A2.0

Reads the firmware version of module 01, and shows

that it is version A2.0.

Command: $02F

Response: !02B1.1

Reads the firmware version of module 02, and shows

that it is version B1.1.

I-7021, I-7021P, I-7022, I-7024, I-7024R
M-7022, M-7024, M-7024L, M-7024R, M-7024U, M-7028

Summary of Contents for M-7024




























































































































































































Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands

ICP DAS USA M-7024, User Manual

Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands