ICP DAS USA M-7024 User Manual Download Page 100

Page: 100 / 187

I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3

100

2.23 $AA9N

Description:

Reads the analog output configuration of a specified
channel.

Syntax:

$AA9N[CHKSUM](CR)

Delimiter character

Address of the module to be read (00 to FF)

Command to read the analog output
configuration

The channel to be read, zero based

Response

Valid command:

!AATS[CHKSUM](CR)

Invalid command:

?AA[CHKSUM](CR)

Delimiter character for a valid command

Delimiter character for an invalid command

Address of the responding module (00 to FF)

Analog output type, see Section 1.11 for details.

Analog output slew rate, see Section 1.11 for
details.

There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.

I-7022
M-7022, M-7024U, M-7028

Summary of Contents for M-7024




























































































































































































Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands

ICP DAS USA M-7024, User Manual

Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands