ICP DAS USA M-7024 User Manual Download Page 102

Page: 102 / 187

I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3

102

2.24 $AA9NTS

Description:

Sets the analog output configuration of a specified channel.

Syntax:

$AA9NTS[CHKSUM](CR)

Delimiter character

Address of the module to be set (00 to FF)

Command to set the analog output configuration

The channel to be set, zero based

Analog output type, see Section 1.11 for details.

Analog output slew rate, see Section 1.11 for
details.

Response

Valid command:

!AA[CHKSUM](CR)

Invalid command:

?AA[CHKSUM](CR)

Delimiter character for a valid command

Delimiter character for an invalid command

Address of the responding module (00 to FF)

There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.

I-7022
M-7022, M-7024U, M-7028

Summary of Contents for M-7024




























































































































































































Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands

ICP DAS USA M-7024, User Manual

Search results

Summary of Contents for M-7024

Reviews:

Brands by name

Popular brands