![background image](http://html.mh-extra.com/html/icom/ic-7100/ic-7100_advanced-instructions_611491374.webp)
21
SPECIFICATIONS AND OPTIONS
21-5
• HM-103
hand
microphone
Hand microphone equipped with [UP]/[DOWN] switches.
• HM-151
hand
microphone
Remote control microphone.
• HM-198
hand
microphone
Hand microphone equipped with [UP]/[DOWN] switches. The
same as that supplied with the transceiver.
• MB-62
mobile
mounting
bracket
Mounts the transceiver Main unit or the AT-180 under a shelf
board or desk.
• OPC-420
shielded
control
cable
The shielded control cable protects the transceiver from RF
feedback and extends the separation between the AH-4 and
the transceiver up to 10 meters (32.8 feet).
• OPC-589
microphone
adapter
cable
Conversion between 8-pin modular and 8-pin metal connec-
tor for using a desktop microphone.
• OPC-599
adapter
cable
13-pin, ACC connector to 7-pin + 8-pin ACC connector.
• OPC-742
acc
13-
pin
cable
Required when using both of the AT-180 and 144/430MHz
Linear amplifier.
• OPC-1529R
data
communication
cable
(RS-232C type)
Allows low-speed data communication in the DV mode, and
receiving a GPS data from a third-party GPS receiver.
• OPC-2218LU
data
communication
cable
(USB type)
Allows low-speed data communication in the DV mode.
• OPC-2253
control
cable
• OPC-2254
control
cable
OPC-2253: 3.5 m (11.5 ft) type,
OPC-2254: 5 m (16.4 ft) type
• CS-7100
cloning
software
Use this software to program settings, memory channels
and set mode contents quickly and easily via your PC’s USB
port.
A USB cable is required. (A-Mini B type, supplied with the
transceiver)
• RS-BA1
ip
remote
control
software
To remotely control radios using the RS-BA1,
BE SURE
that you comply with your local regulations.
Approved Icom optional equipment is designed for
optimal performance when used with an Icom trans-
ceiver.
Icom is not responsible for the destruction or damage
to an Icom transceiver in the event the Icom transceiv-
er is used with equipment that is not manufactured or
approved by Icom.
Options (Continued)
IC-PW1/EURO
hf
/50
mhz
all
band
1
kw
linear
amplifier
Full-duty 1 kW linear amplifier including an automatic antenna tuner. Has automatic
tuning and band selection capability. Full break-in (QSK) operation is possible. The
amplifier/power supply unit and the remote control unit are separated. An optional
OPC-599 is required for connection.
Previous view