2
INSTALLATION AND CONNECTIONS
2-8
Make sure the [POWER] switch is OFF before connect-
ing the DC power cable.
•
We recommend using Icom’s optional power supply
(PS-126: DC13.8 V/25 A).
D
Connecting the PS-126 power supply
Rear panel
GND
PS-126
Use the attached AC cable to con-
nect to AC outlet.
To
[DC 13.8V]
The transceiver needs followings:
•
DC 13.8 V (Capacity: 22 A and over)
•
A power supply with an over current protective line
and with a less voltage fluctuation or ripple
D
Connecting a non-Icom DC power supply
Connect the black DC power cable to the (–) Negative
terminal, and the red DC power cable to the (+) Positive
terminal.
Rear panel
GND
DC power socket
Fuse
holder
RED
BLACK
Stabilized power supply
AC outlet
OPC-1457
R
WARNING!
(About DC power supply)
•
Make sure DC power cable polarity is correct.
Red: Po terminal
Black: Negative – terminal
•
NEVER
cut the DC power cable between the DC
plug and fuse holder.
•
DO NOT
use unattached or undesignated DC pow-
er cable.
•
DO NOT
forcibly pull or bend the DC power cable.
Install the devices far enough from the place where
people might put things or step on the DC power
cable.
Power Supply Connections
Connect to
power supply
For European versions
OPC-2095
GND
DC power socket
Previous view