19
MAINTENANCE
19-3
Resetting the CPU
D
Partial reset
Push
q
SET
(
C
) to enter the Set mode.
Touch the “Reset” item of the “Others” Set mode.
w
(Others >
Reset
)
• If the specified item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page.
Touch “Partial Reset.”
e
When the dialogue appears, touch “YES.”
r
The transceiver displays "PARTIAL RESET," then
t
the partial reset is completed.
If you want to reset the operating parameters to their
default values (VFO frequency, VFO settings, menu
group’s contents) without clearing certain data, a par-
tial reset can be performed as described below.
L
eft
R
ight
C
enter
D
isplay
After performing the partial reset
A Partial reset resets operating settings to their default
values (VFO frequency, VFO settings, menu contents)
without clearing the items listed below:
• Memory channel contents (Section 4)
• Repeater list (p. 9-28)
• Call sign memories (p. 9-45)
• TX Message data (p. 9-2)
• GPS Memory contents (p. 10-7)
• GPS Message data (p. 10-17)
• Programmed user band edge frequencies (p. 3-14)
• Memory keyer contents (p. 4-6)
• DTMF memories (p. 6-17)
• RTTY memories (p. 4-18)
• REF Adj (Reference frequency) setting (p. 17-22)
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
Previous view