6
FUNCTIONS FOR TRANSMIT
6-11
Quick Split function
When you touch [SPLIT](
D
) for 1 second, the Split fre-
quency operation is turned ON. The undisplayed VFO
is automatically changed according to the plus/minus
frequency shift programmed in the “SPLIT Offset” item
of the “Function” Set mode (p. 17-19). Or the VFOs
are equalized when 0.000 MHz (default setting) is pro-
grammed as the Split Offset (p. 17-19).
SET
(
C
) > Function > SPLIT/DUP >
SPLIT Offset
The Quick Split function is ON by default. For your con-
venience, it can be turned OFF in the “Quick SPLIT”
item of the “Function” Set mode (p. 17-19). In this case,
touch [SPLIT](
D
) for 1 second does not equalize the
VFO A and VFO B frequencies.
SET
(
C
) > Function > SPLIT/DUP >
Quick SPLIT
Suppose you are operating at 21.290 MHz (USB) in
q
VFO A.
Push
w
MENU
(
C
) one or more times to select the
“M-1” screen (M-1 menu).
Touch [SPLIT](
e
D
) for 1 second.
• Split frequency operation is turned ON.
• The transmit (VFO B) frequency is equalized to the re
-
ceive (VFO A) frequency.
While holding down
r
XFC
(
R
), rotate the Dial to set
the frequency offset between transmit and receive.
• When
XFC
(
R
) is released, the receive frequency is dis-
played.
L
eft
R
ight
C
enter
D
isplay
The example shows the split offset
is set to +20 kHz (+0.020 MHz).
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
• While holding down
XFC
Split icon
Shows the transmit frequency (VFO B)
Shows the transmit frequency (VFO B)
Shows the frequency shift and direction
Touch [SPLIT]
for 1 second
Previous view
