![background image](http://html.mh-extra.com/html/icom/ic-7100/ic-7100_advanced-instructions_611491012.webp)
1
PANEL DESCRIPTION
1-8
q
TX ICON
Indicates either the displayed frequency can be
transmitted, or not.
➥
“
” appears while the operating frequency is in
an amateur band.
➥
“
” appears while the operating frequency is
not in an amateur band. However, when the “Band
Edge Beep” item is set to “OFF” in the “Function”
Set mode (p. 17-18), “
” does not appear.
SET
> Function >
Band Edge Beep
“LMT” appears while the output power is de-
➥
creased because the Power FET’s temperature
is high.
“HOT” appears while transmission is inhibited be-
➥
cause the Power FET’s temperature is too high.
w
MODE ICONS
Displays the selected operating mode.
➥
• “-D” appears when SSB data, AM data or FM data
mode is selected.
Touch to enter the Mode selection screen.
➥
• On the Mode selection screen, touch the block to se
-
lect the operating mode.
e
PASSBAND WIDTH ICON
Graphically displays the passband width for twin
PBT operation and the center frequency for IF shift
operation.
r
TONE SQUELCH/DIGITAL SQUELCH ICONS
(Mode: FM)
➥
“TONE” appears when the repeater tone function
is ON. (p. 4-25)
➥
“TSQL” appears when the tone squelch function
is ON. (p. 4-22)
➥
“DTCS” appears when the DTCS function is ON.
(p. 4-23)
(Mode: DV)
➥
“DSQL” appears when the digital call sign squelch
function is ON. (p. 9-22)
➥
“CSQL” appears when digital code squelch func-
tion is ON. (p. 9-22)
t
IF FILTER ICON
Shows the selected IF filter.
➥
Touch to select one of three IF filter settings.
➥
• The selected filter passband width and shifting value
are displayed for 2 seconds in the window.
Touch for 1 second to display the “FILTER” screen
➥
to adjust the filter passband width.
➥
When the “FILTER” screen is displayed, touch for 1
second to return to the previous screen.
y
QUICK TUNING ICON
Appears when the Quick tuning mode is selected.
• When “
Z
” is displayed, the frequency changes in preset
kHz or 1 MHz quick tuning steps.
• When “
Z
” is not displayed, the frequency changes in 10
Hz or 1 Hz steps.
u
➥
Appears when valid position data is received from
a GPS receiver that is connected to the [DATA1]
jack.
➥
Blinks when invalid data is received from the GPS
receiver.
i
SD CARD ICON
➥
“ ” appears when an SD card is inserted.
➥
“ ” and “ ” alternately blinks while accessing the
SD card.
Controller — Function display
q
w
e
t
r
i
y u
Previous view