Icom IC-7100, Advanced Instructions, Page: 197 / 375

9
D-STAR OPERATION <ADVANCED>
9-44
According to the programmed contents, such as posi-
tion data, UTC offset, and so on, the distance between
your position and the repeater or repeater time can be
displayed on the REPEATER DETAIL screen.
The Detail screen can also be entered in the
“
FROM
SELECT” screen.
Push
q
DR
(
C
) to enter the DR mode.
• The DR mode is selected.
Touch the “TO” field.
w
Touch “Gateway CQ.”
e
Touch the repeater group.
r
• Example: “11: Japan”
Touch the repeater for 1 second.
t
• Example: “Hirano”
Touch “Detail.”
y
• The REPEATER DETAIL screen is displayed.
Touch [
u
 ](
D
) to return to the RPT LIST screen.
While in the DR mode, and if you set the repeater as
shown to the right, the repeater details screen can be
displayed.
Touch
q
QUICK
(
C
) or touch the repeater for 1 sec-
ond to open the quick menu screen.
Touch “Repeater Detail.”
w
• The REPEATER DETAIL screen is displayed.
* When the position data accuracy level is set to “Approxi-
mate,” direction data is not displayed if the distance to the
repeater is under 5 kilometers.
Example:
Shows the “Hirano” repeater detail screen
Repeater name
Sub name
Group number
Call sign
Duplex setting
Repeater time
Repeater
frequency
Distance from
your position
Direction from
your position*
Repeater detail screen
Repeater is set in “FROM”
“Repeater Detail” is selected
Return to the
RPT LIST screen.
Touch the
“TO” field.
Touch the
repeater for
1 second.
Example:
“Hirano.”
Touch the re-
peater group.
Example:
“11:Japan.”
Touch
“Detail.”
Touch
“Gateway CQ.”
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Previous view