9
D-STAR OPERATION <ADVANCED>
9-35
Duplex direction setting
9.
• This item appears only when “YES” is selected in
‘7. Access repeater setting.’
• “DUP
–
” is automatically set when the access re-
peater frequency is programmed in ‘8. Access re-
peater frequency programming.’
• If necessary, you can change the duplex direction.
#4
Touch “DUP:.”
#5
Touch a desired duplex direction item.
• OFF: Turn the duplex function OFF.
For a simplex operation, this item MUST be set to
“OFF.”
• DUP–: The transmit frequency shifts down from the re
-
ceive frequency by the offset amount.
• DUP+: The transmit frequency shifts up from the receive
frequency by the offset amount.
Frequency offset programming
10.
• This item appears only when “YES” is selected in
‘7. Access repeater setting.’
• The offset value* is automatically set when the ac
-
cess repeater frequency is programmed in ‘8. Ac-
cess repeater frequency programming.’
*The default value differs, depending on the version.
• If necessary, you can change the frequency offset.
#6
Touch [
√
](
D
).
#7
Touch “OFFSET FREQ” to enter the frequency offset
edit mode.
• A cursor appears and blinks.
#8
Touch the desired number to input the frequency off-
set.
• Touch [CE](
D
) to delete the selected number.
•
Touch [
f
](
D
) to move the cursor backwards, or touch
[
g
](
D
) to move the cursor forwards.
* If desired, touch the frequency offset for 1 second to open
the Function set window, and then touch the “Frequency
Clear” to delete the frequency.
#9
After entering, touch [ENT](
D
).
Repeater list programming (Continued)
☞
Continued on the next page.
Touch “DUP”
Touch “DUP-”
Touch
“OFFSET
FREQ”
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Example:
“5.000.0”
Touch [ENT]
Previous view