9
D-STAR OPERATION <ADVANCED>
9-33
Repeater list programming (Continued)
Gateway repeater call sign programming
5.
The 8th digit in the call sign, programmed in ‘4. Re-
peater call sign programming’ as described above, is
automatically set to “G” as the gateway port. And you
can skip this setting and go to the next item.
If you need to change it, follow the steps, as de-
scribed below.
@1
Touch “GW CALL SIGN” to enter the gateway re-
peater call sign edit mode.
• A cursor appears and blinks.
@2
Touch the desired block one or more times to
select
the desired character or symbol.
• A to Z, 0 to 9, / and a space can be selected.
• Touch
“AB
⇔
12” to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](
D
) to delete the selected character, symbol
or number.
• Touch “
” to input a space.
@3
Touch [
f
](
D
) to move the cursor backwards, or
touch [
g
](
D
) to move the cursor forwards.
@4
Repeat steps
@2
and
@3
to enter a call sign of up to 8
characters, including spaces.
• The 8th digit in the gateway repeater call sign is set to
only “G” or a space.
@5
After entering the gateway repeater call sign, touch
[ENT](
D
).
Repeater group viewing
6.
In this item, you can view the repeater group that is
selected in [1. Repeater group selection]. And you
can skip this setting and go to the next item.
If necessary, you can change the repeater group.
@6
Touch [
√
](
D
).
@7
Touch “GROUP” to enter the repeater group selec-
tion mode.
@8
Touch [
∫
] or [
√
](
D
) to select the desired repeater
group (01 to 25).
• The selected repeater group is displayed on the RE
-
PEATER LIST EDIT screen.
☞
Continued on the next page.
Example:
“JP1YYY G”
Example:
“Japan”
Touch
“GW CALL
SIGN”
Touch
“GROUP”
Touch [ENT]
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Previous view