10
GPS/GPS-A OPERATION
10-15
GPS alarm setting (Continued)
D
Example:
Alarm area (RX/Memory)
Alarm Setting is set to RX.
Push
q
SET
(
C
) to enter the Set mode.
Touch the “GPS ALARM” item of the “GPS” Set
w
mode.
GPS >
GPS Alarm
• If the specified item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page.
Touch “Alarm Select.”
e
Touch “RX.”
r
• If you want to set the alarm to a GPS memory channel,
touch “Memory,” and then touch “(No Group)” or “A” to
“Z.”
Push
t
SET
(
C
) to exit the Set mode.
• When a station with its GPS alarm set enters within an
approximate 1 kilometer (1093 yard) range, the beep
sounds once. When it enters within an approximate 500
meter (546 yard) range, a beep sounds three times.
• When the GPS alarm beeps, “GPS ALARM” pops up on
the screen and then the “ ” icon blinks.
• To cancel the GPS alarm, repeat step
r
and select
[Alarm OFF].
Adding or editing GPS memory (Continued)
NOTE:
•
When “RX” or a GPS memory channel is selected,
the alarm sounds depending on the “Alarm Area
(RX/Memory)” setting in the Set mode.
GPS > GPS Alarm >
Alarm Area (RX/Memory)
• Even if “RX” is selected in step
r
, and the received
signal has no position, the GPS alarm does not
sound.
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
“RX” is dis-
played.
Touch “RX.”
The pop up is dis-
played and beeps
sound, depending
on the setting of
the alarm area.
Blinks
GPS beeping screen
Previous view
