![background image](http://html.mh-extra.com/html/icom/ic-7100/ic-7100_advanced-instructions_611491149.webp)
8
D-STAR OPERATION <BASIC>
8-17
D
Using the “Your Call Sign”
The “Your Call Sign” memory stores the programmed
“UR” (destination) call sign.
When you select an individual station call sign for the
“TO” (Destination) setting using “Your Call Sign,” a gate-
way call can be made.
When you call the destination through a gateway, the
signal is automatically sent to the last repeater that the
station accessed.
So, even if you don't know where the station is, you can
make a call.
NOTE:
If the repeater, set to “FROM” (Access Re-
peater) has no Gateway call sign, you cannot make
a gateway call.
Example:
Select “TOM” from the “Your Call Sign.”
Push
q
DR
(
C
) to select the DR mode.
Check whether or not “TO” is selected.
w
• If “TO” is not selected, touch the “TO” field.
Touch the “TO” field.
e
• The “TO SELECT” screen appears.
Touch “Your Call Sign.”
r
• The “YOUR CALL SIGN” screen is displayed.
Touch the destination name or call sign.
t
• Example: “TOM”
• The transceiver returns to the DR mode screen, and
“TOM” is displayed in “TO.”
After selecting a destination, you can select another
station preset in your transceiver by rotating the Dial
or [M-CH] (
L
).
The name and call
sign of the selected
station is displayed.
“TOM” is set in “TO.”
Touch the
destination.
( Example:
“TOM”)
“TO” (Destination) setting (Continued)
“TO” is selected.
Touch
“TO.”
Touch
“Your Call Sign.”
L
eft
R
ight
C
enter
D
isplay
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
Previous view