IBM System x3750 M4 Type 8733 Installation And Service Manual Download Page 555

Page: 555 / 694

81010701-1407ffff

Numeric sensor [NumericSensorElementName] going high (upper non-critical) has deasserted.

Explanation:

IMM has detected that a microprocessor and memory expansion tray voltage regulator temperature

has returned to the normal range.

Severity:

Info

Alert Category:

Warning - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0491

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

81010701-1408ffff

Numeric sensor [NumericSensorElementName] going high (upper non-critical) has deasserted.

Explanation:

IMM has detected that a microprocessor and memory expansion tray voltage regulator temperature

has returned to the normal range.

Severity:

Info

Alert Category:

Warning - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0491

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

81010701-1409ffff

Numeric sensor [NumericSensorElementName] going high (upper non-critical) has deasserted.

Explanation:

IMM has detected that a microprocessor and memory expansion tray voltage regulator temperature

has returned to the normal range.

Severity:

Info

Alert Category:

Warning - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0491

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

81010701-1407ffff • 81010701-1409ffff

Appendix D. Integrated management module II (IMM2) error messages

539

Summary of Contents for System x3750 M4 Type 8733























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3750 M4 Type 8733

Reviews:

Related manuals for System x3750 M4 Type 8733

Brands by name

Popular brands

IBM System x3750 M4 Type 8733, Installation And Service Manual

Search results

Summary of Contents for System x3750 M4 Type 8733

Reviews:

Related manuals for System x3750 M4 Type 8733

Brands by name

Popular brands