IBM System x3750 M4 Type 8733, Installation And Service Manual

Page: 132 / 694

Completing the installation
To complete the installation, complete the following steps:
1. Make sure that the SAS cable guide is closed.
2. If you removed any air baffles or the microprocessor and memory expansion
tray, reinstall them (see “Replacing the DIMM air baffle,” “Replacing the
microprocessor and memory expansion tray assembly” on page 118, and
“Replacing the microprocessor air baffle” on page 117).
3. Replace the fan cage assembly, if you removed it (see “Replacing the fan cage
assembly” on page 119).
4. Reconnect the cables (see “Connecting the cables” on page 120).
5. Update the server configuration (see “Updating the server configuration” on
page 121).
6. Reconnect the power cords.
7. If you removed the server cover, replace it (see “Replacing the server top
cover” on page 119).
8. Start the server. Confirm that is starts correctly and recognizes the newly
installed devices, and make sure that no error LEDs are lit.
9. (IBM Business Partners only) Complete the additional steps in “Instructions
for IBM Business Partners” on page 24.
10. Install the server in the rack (see the Rack Installation Instructions that come
with the server for instructions).
Replacing the DIMM air baffle
To install the DIMM air baffle, complete the following steps:
1. Read the safety information that begins on page “Safety” on page vii and
“Installation guidelines” on page 33.
2. Align the tabs on the sides of the DIMM air baffle with the slots on the sides of
the chassis wall and lower the DIMM air baffle into the server.
116
System x3750 M4 Types 8722 and 8733: Installation and Service Guide