IBM System x3750 M4 Type 8733 Installation And Service Manual Download Page 378

Page: 378 / 694

40000024-00000000

Flash of [arg1] from [arg2] failed for user [arg3].

Explanation:

The specified firmware has not been updated.

Severity:

Info

Alert Category:

System - other

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0036

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

40000025-00000000

The [arg1] on system [arg2] is 75% full.

Explanation:

The IMM event log is 75% full. When the event log is completely full, the new entries will overwrite

the oldest entries. To avoid losing older log entries, save the log as a text file and clear the log.

Severity:

Info

Alert Category:

System - Event Log Fullness

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0037

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

40000026-00000000

The [arg1] on system [arg2] is 100% full.

Explanation:

The IMM event log is full. New entries in the log will overwrite the oldest entries. To avoid losing

older log entries, save the log as a text file and clear the log.

Severity:

Info

Alert Category:

System - Event Log Fullness

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0038

SNMP Trap ID:

Automatically notify Support:

User response:

To avoid losing older log entries, save the log as a text file and clear the log.

40000024-00000000 • 40000026-00000000

362

System x3750 M4 Types 8722 and 8733: Installation and Service Guide

Summary of Contents for System x3750 M4 Type 8733























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3750 M4 Type 8733

Reviews:

Related manuals for System x3750 M4 Type 8733

Brands by name

Popular brands

IBM System x3750 M4 Type 8733, Installation And Service Manual

Search results

Summary of Contents for System x3750 M4 Type 8733

Reviews:

Related manuals for System x3750 M4 Type 8733

Brands by name

Popular brands